Genius of the Rules-Style System

The review team is here.

Yanhua University was notified in advance, and school leaders and professors from various departments were responsible for the reception. However, when they were introduced to the formation of the review team, they still felt a little overwhelmed.

The review team is not a group of a few people, but a team of more than 30 to 40 people, including the Aviation Group, Kunlun Engine R\u0026D Group, Capital Aviation Materials Research Institute, Science and Technology Department, and Hongfeng Industry representing the military-industry industry, etc. Five aspects of people.

The main figures include Liu Jiankun, general manager of the aviation group, Zhang Gangchuan, head of the Kunlun engine unit, Liu Zecheng, deputy director of the Science and Technology Department, Gao Mingfu, director of the Aviation Materials Research Institute, and Xia Kaide, the representative of Hongfeng Industry. Each of them brought several experts and auxiliary staff, all taken together, the scale is very large.

The leaders of the team are Liu Zecheng and Liu Jiankun. They absolutely support Zhao Yi and support the establishment of the Kunlun Team 2 for R\u0026D. They came here for an inspection to see the current R\u0026D environment and the formation of the Kunlun Team 2. Find out what urgent needs you have.

At the same time, they also wanted to communicate face-to-face with Zhao Yi about their ideas on aero-engine research and development, etc.

The Kunlun Group 2 was established relatively hastily. Zhao Yi just wrote a report and applied for it. The aviation group and Technology expressed support, and then it was established directly.

This is also where Zhang Gangchuan is dissatisfied.

"Think about the Kunlun Group. They applied for it in the 1970s, and it took almost ten years before the project was actually approved. Later, during the research and development process, work was stopped twice. It was only after senior leaders signed off that the research and development continued."

"The current Kunlun Group 2 is just like a joke. It was approved after just applying..."

Zhang Gangchuan kept shaking his head as he spoke, "There is no detailed design, no plan, and no R\u0026D personnel, so we directly allocate funds. Times are really different."

His tone was a bit weird, obviously expressing his inner dissatisfaction. Considering his ability and status, he was not afraid of others hearing him. He was standing next to Liu Jiankun and said it.

Liu Jiankun could only smile bitterly, "Old Zhang, I know you are unbalanced, but isn't that Zhao Yi? If it were someone else, would it be possible? Zhao Yi cannot judge it with common sense. Look at the front Research, K03B, the performance can catch up with the international level, which was something you couldn’t even think of before, right?”

"I know it too!"

Zhang Gangchuan sighed and shook his head.

Others gathered around and just laughed secretly. They knew Zhang Gangchuan was depressed. He dragged Zhao Yi to the Kunlun engine group, showed quite amazing research and development capabilities, and quickly made significant results. However, Zhao Yi immediately decided to establish the Kunlun Group 2. It's like designing an engine from scratch, and it's still a turbofan engine, which is a bit depressing for everyone.

However, everyone knows why Zhao Yi did this. To put it bluntly, he is still limited by the Kunlun engine group. The design has to be submitted continuously. It must first pass the review of the Kunlun group before it can proceed to the cooperative military factory, whether it is design or manufacturing. All very troublesome.

In this regard, Zhang Gangchuan has no way to solve it. The rules are like this. Zhao Yi is equivalent to an 'external expert' in the Kunlun engine group. Every R\u0026D, design or consumption of funds needs to pass the evaluation of the Kunlun engine group. He still had to go through his approval, and he couldn't give Zhao Yi special authority. If he wanted to have independent funds and truly achieve freedom of research and development, he could only establish a new engine research and development team.

Zhang Gangchuan knew, understood, understood. When he arrived at the power engineering laboratory and saw the dismantled prototype, he became even more depressed. He could not directly say that dismantling the prototype was not possible, but provoked the question, "The venue No! If you put the parts here, will there be problems over time?"

"Doing research and development still requires a good environment, especially the research and development of engine parts. What the Kunlun Group 2 does is not reverse engineering, but based on the Kunlun engine technology, we need to make further progress!"

"I think the best way is to move the second group to the aviation base, and bring the first and second groups together to facilitate technical exchanges and exchanges..."

Zhang Gangchuan kept talking.

Liu Jiankun, Gao Mingfu and Xia Kaide were next to him. They looked at each other. Xia Kaide whispered, "This old Zhang is still putting gold on his face. A hundred-foot-tall pole? What is the Kunlun engine?" A hundred feet? I guess 50 feet would be good!"

"Puch!"

Liu Jiankun and Gao Mingfu couldn't help laughing together.

Liu Jiankun shook his head and said, "Lao Zhang just wants the second group to go to the first group and doesn't want to separate. What they are doing now is a process of fixing the problem. It is impossible for any new technology to come out. The second group is a nascent group. Everything is starting from scratch, and the ability to innovate will be very strong.”

Gao Mingfu said, "I agree with Academician Liu's statement. They will have strong innovation capabilities as soon as they are formed. The turbofan engine is very complex. I hope that the second group can complete all the designs..."

He shook his head silently as he spoke, meaning he was not optimistic about it.

"However, as long as there are a few innovations, let alone k03b, even if it is a sub-level result, it will be worth investing hundreds of millions of dollars."

"Yep!"

Xia Kaide nodded, and then said depressedly, "As for k03b, Academician Zhao shouldn't hand over k03b to Factory 307. They are all national factories and enterprises, and we also want to produce high-end materials."

Liu Jiankun smiled and shook his head and said, "There is a chance, there is a chance. Now the second team is cooperating with your factory owner. If you have any designs in the future, don't you have to look to Hongfeng?"

"Right!"

Xia Kaide was looking forward to it.

Several main leaders over there were talking and laughing, and a group of experts and technicians in the distance were also talking, "This power engineering laboratory is really bad. Some of the equipment is new and probably not used much. The parts of the prototype are The protection was not rigorous, and it would break if left for a long time.”

"Kunlun Group 2 still does design here?"

"What can be designed here? Many experiments cannot be done. Technical research and development still requires a special venue."

"Let me see, the second group still has a base dedicated to research and development. Not to mention compared with the aviation base, it can't be too different, right? This kind of ordinary university environment is not good at all. In the future, there will be more people. , there are hundreds of people, let alone doing research and development, food and accommodation are problems.”

"The higher-ups will definitely consider this, right? I heard Vice Minister Liu said that a small factory in the mountains should be allocated to the second group."

"Yeah?"

"Where's the news?"

"Even if there is a small factory, I feel that the second team cannot get up. There is a first team, and the second team..."

"Academician Zhao's level is quite high. If he were to do research and development, I would definitely be optimistic about it. But the turbofan engine is too complicated. He can do the job of ten people by himself, so he can't develop the engine himself, right?"

"I think so too. It is estimated that after this incident, Kunlun Group 2 will need to recruit a large number of people..."

"Do you want to come over?"

"What are you doing here? It's good for me to be in a group..."

A large group of people were talking about the issue of the Kunlun Team 2. Many people said that they would not come over if they had the chance. In fact, most people had the opposite idea.

For example, Zhou Kai.

Zhou Kai is the leader of the Kunlun engine power group.

When Zhao Yi approached the Kunlun team for help, he felt that there was no point in conducting high-end combustion chamber demonstrations, so he directly sent Wang Zhiguo to deal with it. As a result, he soon heard that Zhao Yi's team had developed high-end nickel alloys that surpassed international standards. Turbine blade material, I immediately regretted it.

As Liu Jiankun said, the work of the Kunlun engine unit is mainly to constantly repair problems, that is, to 'continuously fight against failures.' If given the choice, no one would be willing to constantly repair failures, but to make high-end, advanced engines. R\u0026D.

Zhou Kai said, "I must be in the Kunlun Group", but what he was thinking in his heart was, "When the second group expands its enrollment, I will apply for a job there. I will definitely have a better future with Academician Zhao than with Zhang Gangchuan", and, "I'm so envious Little Wang!"

Not only the people from the Kunlun engine group, but also the people from the Capital Aviation Materials Research Institute also hope to join the Kunlun Group 2 because Zhao Yi has shown amazing abilities in material research and development. He led a few people to complete the research and development of K03B and rushed directly to the Kunlun Group. Exceeding the international advanced level.

The Capital Aeronautical Materials Research Institute has a large R\u0026D team. There are more than 20 people working on single crystal nickel. The entire team has worked for several years, but it is not as good as Zhao Yi who led a few people to do R\u0026D for three months. The difference is really too big.

It would be understandable if Zhao Yi's team had many geniuses, but in fact, the only ones worth mentioning in his team are Wang Zhifang and Zhang Hongtao. The alloy materials research and development circle is very small, and both of them can be said to be from the Aerospace Materials Research Institute. An acquaintance.

As for Li Rongmao and Shen Binghe...

do not know!

What can we talk about the two newly signed associate researchers at Yanhua University?

So in the final analysis, the success of research and development depends on Zhao Yi. Many people related to materials research and development also hope to follow Zhao Yi in research and development. Being able to produce results quickly is the biggest attraction to them.

…

The review team is in the Power Engineering Laboratory.

The laboratory is large enough to accommodate dozens or hundreds of people without feeling crowded.

Zhao Yi finally came.

He and Yuan Haitao walked into the operation room door together, and were immediately surrounded by enthusiasm, "Academician Zhao is here!"

"Academician Zhao!"

"I just heard that you were at work. We also asked Captain Yuan to wait for a while before calling you. Did we bother you?"

"I came two days early this time. It's not a surprise attack. It's Manager Liu's fault. He came too early."

Zhao Yi smiled and greeted several people.

After a few pleasantries, they quickly got to the point. Liu Chengze asked with concern, "I heard that your team only hired a few people. Is there a problem with the talent review? Or are the requirements relatively high?"

Zhao Yidao, "There are no requirements for this. We only recruit people when we need them."

Liu Jiankun asked, "I saw in the application report that there are requirements for the site. There is a small factory in the mountains to the north. It can be used as a research and development base with appropriate modifications..."

Zhao Yidao said, "R\u0026D can be done here. My application for the site is mainly for the later stage. If a prototype is produced, assembly and testing will be a problem, and it certainly cannot be carried out in the school."

"That's for sure."

Liu Jiankun nodded and said, "But it's still too early, isn't it? I'm not in a hurry about the venue. How about funding?"

"If I have a need, I will definitely report it." Zhao Yi said with a smile.

"We definitely support it with both hands."

Both Liu Zecheng and Liu Jiankun had spoken, and Zhang Gangchuan also asked reluctantly, "In terms of talent, most of the former core technical staff of our Kunlun group have gone to Wangwu..."

Zhao Yidao said, "It doesn't matter, we don't need people for the time being. If there is a need, I will be shameless and will definitely ask."

"OK, no problem."

Gao Mingfu said, "In terms of materials, if you have any needs, you can contact our Aviation Academy for cooperation. In terms of aviation materials, even the Academy of Sciences cannot compare with us."

"Thanks."

Zhao Yi felt the enthusiasm of the review team, and he was in a good mood, but what he was most interested in was Xia Kaide from Hongfeng Industry. After shaking hands with Xia Kaide, he immediately said, "Team Leader Xia, I want to Learn about the precision manufacturing capabilities of your Hongfeng Industry."

"Which aspect?" Xia Kaide asked doubtfully.

"In many aspects, for example, the manufacturing of the engine main shaft, how are the turbine blades in the prototype you made for Kunlun shaped? If I want to add subtle hole design based on the hollow mentality, can it be achieved? "

"this……"

"Also, the main material of the internal skin of the engine I designed is titanium alloy, right? Can titanium alloy be directly molded into a uniform porous structure, that is, multiple uniform holes can be created in an area of ​​several square centimeters? …”

"this……"

"Do you have the technology for integral blisk? Our latest design requires a relatively high level of blisk. If it is electron beam welding, it will definitely increase the weight..."

"in addition……"

Zhao Yi said a lot in succession.

Xia Kaide tried to answer at first, but then he simply covered his forehead and called the precision manufacturing expert ‘Gong Zhang’ he brought over. “Gong Zhang, you know more about this than me. Let’s talk to Academician Zhao.”

Mr. Zhang is about fifty years old, with dark and rough skin. At first glance, he looks like someone who often stays in the factory. However, this kind of person will have long-term exposure to front-line manufacturing and understand technical issues in detail.

"Hello, Mr. Zhang!"

After Zhao Yi shook hands with Zhang Gong, he began to talk about Jinggong's requirements. Zhang Gong's answers were much smoother than Xia Kaide's. He could answer many questions directly, and even if some things couldn't be done, he could also suggest alternative methods.

The two of them lost track of time once they communicated.

Everyone else stood nearby and waited. They were very patient at first, but later they realized that after an hour, they couldn't wait any longer, but they couldn't directly interrupt.

Liu Jiankun called Yuan Haitao over and asked in a low voice, "Why is Academician Zhao interested in precision engineering technology? Is he going to do research in this area?"

Others looked over.

Yuan Haitao shook his head and said, "That's not true. Because our team's design is almost done, the next step is to apply for design finalization and manufacture a prototype. Academician Zhao wants to learn about Seiko technology and see if the prototype can be manufactured according to the design."

"——?"

Liu Jiankun opened his mouth slightly and was completely stunned.

Zhang Gangchuan laughed when he heard this. He pointed at Yuan Haitao and said, "Captain Yuan, you have made progress in the six months since you have been here! You even dared to joke directly when talking to General Manager Liu."

Yuan Haitao turned his head and looked over, and said seriously, "Director Zhang, you know, I never joke when it comes to work." His cold and serious look shocked the others.

No kidding?

The design of Kunlun Group 2 is ready to be applied for finalization. The next step is to make a prototype?

They looked towards Zhao Yi together.

Zhao Yi communicated with Mr. Zhang very seriously about precision craftsmanship, constantly asking, ‘Does such-and-such technology exist?’, ‘Can such-and-such parts be shaped in such-and-such a way,’ etc.

Their mouths suddenly opened in surprise.

this……

It can not be! !