Genius of the Rules-Style System

On the way back, Zhao Yi and Sun Liang carefully discussed biological issues and finally came to two conclusions.

First of all, Niu Lianhua's family genes are very good, and Zhao Linlin is a clear proof. They have met Zhao Linlin's other relatives, and their appearance and appearance are also very good.

In fact, Niu Lianhua's appearance is not bad either. The reason why she looks a little scary is mainly because of her big build, bitter and hateful temperament, her bad hair style that she never takes care of, and her super ugly glasses.

In short, a lot.

These all added together can overwhelm the slight advantage of appearance.

Xue Pinggui's problem is purely genetic.

Zhao Yi and Sun Liang concluded from the discussion that Xue Pinggui's family genes were passed down from male to female, and they gave birth to two lovely daughters, which can be explained.

Of course, joking aside, they were still happy from the bottom of their hearts that the two teachers could live happily together.

Zhao Yi was happier than Sun Liang.

If we look back on the past, Zhao Yi can still be regarded as their matchmaker, and he can be regarded as doing a good thing by being able to facilitate a good marriage.

At the same time, he also lamented in his heart that history has been greatly changed.

In the original memory, Xue Pinggui's wife was not Niu Lianhua. The two could only be regarded as colleagues at best, and their relationship had always been very bad. He was a little better, taking a wife and living an ordinary life. Niu Lianhua seemed to have always been is single.

Zhao Yi thought of this and couldn't help but glance at Sun Liang.

Sun Liang definitely didn't know that his life had also been greatly changed.

These are small changes.

The whole world has undergone unprecedented changes because of him, and the little butterfly has grown into a monster that can cause a global storm with just a flap of its wings——

"Pooh!"

Zhao Yi snorted softly, and then couldn't help laughing. Next, he will continue to change the world.

——

A week later.

Zhao Yi returned to the capital by car.

At this time, discussions related to spaceships even became a hot topic in public opinion. Many small media reported that domestic projects to build spaceships would be launched.

There is no accurate source for similar claims, and we don’t know the specifics of the project, but there are many reports.

Under Zhao Yi's Weibo, many netizens left messages asking if there is a spacecraft project.

This is also normal.

The spacecraft project is so important that higher-level departments have held meetings again and again for this purpose, and it is impossible to keep it completely confidential.

In addition, it seems to the outside world that starting the spacecraft project is normal, because the space shuttle experiment was successful.

Now that the space shuttle experiment can be completed, the next step must be to build a spacecraft that can directly conduct space shuttle. The temptation to reach other planets in a short time is too great.

The establishment of Yixing Technology also shows that China will invest a lot of energy in aerospace research and development, and it is logical to start the spacecraft project.

To build a spacecraft that spans the planet, three major technical problems must be solved.

One is energy.

Energy is the core technology. Only a steady supply of energy can enable spacecraft to operate for a long time.

The domestic nuclear fusion research team has announced the experimental research and development results. The nuclear fusion experiment lasted for seven hours, which means that it can last longer in the future, and technological breakthroughs are in the future.

The second is the power speed. The universe is really too big, and the distance between planets is often hundreds of millions of kilometers.

If we relied on original technology, it would take three months to go to Mars. It might take several generations to explore a planet.

Space shuttle technology perfectly solves the distance problem.

The third core is materials, which are also very critical. Only with high-performance materials can we ensure that the spacecraft is not damaged.

The universe seems to be empty, but it is actually very dangerous. Within the range of stars, high-intensity radiation and high-energy electron storms will bring fatal danger to equipment.

Without the support of high-performance materials, no matter how high-tech spacecraft and equipment are placed in space, they will look like they are made of paper.

In the current public information, there is already space shuttle technology and controllable nuclear fusion technology that has not yet been perfected. It is not surprising to hear news of the spacecraft project.

This news spread abroad, and foreign public opinion was not surprised.

Many foreign institutions also hope to participate. They hope to join the project and learn some new technologies.

This is just like the trend a few decades ago when domestic companies learned from foreign technologies. Because foreign technologies are more advanced than domestic technologies, they hope to learn foreign technologies to make up for domestic technological deficiencies.

In terms of the latest technological research and development, China is already far ahead of the world.

Although many people know about the spaceship project and believe that the spacecraft project is indeed undergoing preliminary demonstrations, the spacecraft project is still confidential and internal meetings are still confidential.

The first major meeting will be held just a week later, involving senior leaders and leaders of relevant scientific research institutions, who will make the final decision.

The discussion now is not whether to start the spacecraft project, but how to proceed with the spacecraft project and which institutions are required to participate in the project. The decision-making focus of the first meeting is whether to involve foreign institutions.

This meeting has little to do with Zhao Yi, he just knows the final result--

Agree with the participation of foreign institutions.

How foreign institutions will participate will require a series of follow-up discussions and communication with relevant foreign institutions.

Zhao Yi was not surprised by the result, mainly because the spacecraft project was too huge, involving tens of billions or hundreds of billions of funds. It would be too expensive to carry out the project alone.

Financial considerations are just one of them.

On the other hand, there are issues of construction time and technology. The spacecraft project is not just about three core technologies, but also involves all aspects of technology.

Whether it is electronics, biology, materials, etc., multi-directional high-end technologies are currently not available in China.

For example, materials.

Although China has Z-wave compression material technology, it does not mean that compressed materials are good. The cost of manufacturing compressed materials is high, and the manufactured materials will be very heavy.

Even if it has anti-gravity technology, obviously heavier materials will consume more energy to drive.

In addition, compressed materials may also have performance problems.

Exceeding performance sounds good, but imagine that a problem that can be solved with a layer of thin film needs to be solved by assembling a layer of metal plate. It is completely unnecessary in terms of cost and use.

This is just a technical issue with materials.

There are more technical problems in other directions. Of course, these technologies are not insurmountable or irreplaceable, but they will definitely consume a lot of time.

If other organizations are involved, time and cost can be greatly saved.

After the first internal meeting is over, preparations for the second design demonstration report meeting begin.

This is a demonstration meeting specially prepared for the design team. All participants are very professional people, including the leadership of some scientific research institutions.

More than a dozen people from the design team have come to the capital to participate in the demonstration meeting. They will give a superficial explanation of the overall design of the spacecraft and the design of each part.

Although this meeting is also confidential, design-related confidentiality is not too strict. For example, some of the professionals participating in the meeting are only experts in related fields, and usually only work in universities or institutions. Not working specifically for the national scientific research department.

They signed a confidentiality agreement, but it was difficult to maintain complete confidentiality.

But the surface design is not worried about being revealed, because design is not technology, it just stipulates some things based on technology.

For example, the design of Z-wave devices.

These include the shape of the Z-wave device, how big and shaped it is, what external functions it includes, and what parameters it needs to have.

etc.

Even if all the design content is leaked, it is not a big deal at all, because other institutions do not have Z-wave technology at all, and knowing the design has no meaning.

This design demonstration meeting is expected to last one week.

The design team needs to let each responsible group participating in the meeting understand the overall design and the surface design content of each core department, and they can ask questions about it.

This is not to directly finalize the design, but to finalize the overall structure of the design. Regarding the details, there will be a dedicated team, just like the 'quality inspection department', which will continue to conduct demonstration work to prevent problems in design and manufacturing. .

The design demonstration report will officially begin.

Zhao Yi brought members of the design team to the stage and gave a brief introduction to let everyone know the person in charge of the relevant design section.

The four core members of the design are Zhao Yi, Li Jianming, Yu Xin and Bao Enhong.

Zhao Yi, no need to say more.

Li Jianming is the most capable among the design team and the one who understands design the best.

Yu Xin made the greatest contribution to the design. During the design process, several of his cabin designs were directly adopted.

Bao Enhong is incidental. She is very soft-spoken and eloquent, and serves as the "external spokesperson" of the design team. She is almost a press officer, responsible for answering simple questions in meetings.

The meeting begins.

The rest of the design team walked off the stage, leaving only Zhao Yi. The large screen on the stage showed a concept drawing of the spaceship.

This concept map was drawn by Zhao Yi himself, filled with colors and rendered background. It looks like a scene from a science fiction movie, but the scene is unique.

The design drawing displayed on the screen looks like a large UFO at the bottom, but the overall shape is a triangular cone.

The spaceship consists of three levels.

At the bottom is the UFO shape supported by a large anti-gravity device.

Zhao Yi explained, "The anti-gravity device on this layer is composed of an inner and outer layer. The outer layer of the device wraps the entire spacecraft, and the anti-gravity barrier propped up can cover the entire spacecraft, thereby realizing space shuttle."

"The inner anti-gravity device can only cover the foot of the spacecraft and does not have the function of supporting an anti-gravity barrier. It has two functions. One is to drive the spacecraft to take off and land, and the other is to isolate the planet. gravitational effect."

"For example, if we want to fly outside the solar system and turn on the device with our back to the sun, we can isolate the gravitational effect of the sun. The same is true for other planets, such as Jupiter or other large planets, the gravitational effect will still be very strong. Affecting navigation routes in the universe.”

After continuously introducing the core technology architecture of the bottom layer, he transitioned directly to the middle layer, "This layer has an internal standard circular structure, which is a nuclear fusion device. The outer layer has a large generator and power unit, and it also has an external Extends and covers half of the spacecraft's wings."

"The outer layers of the two wings are mainly composed of solar panels to supplement energy and ensure energy security."

"At the same time, propulsion devices will be installed at the ends of both wings to control the direction of the spacecraft."

"The nuclear fusion device is installed in the center, mainly for convenience. Initially we had two design options, but finally adopted the design in the center, because the parallel design will affect the coverage of the anti-gravity barrier and will also Extend energy delivery.”

Finally, there is the third level.

"Z-wave device."

Zhao Yidao, "The top layer is the Z-wave generating device. Our design uses a compressed nickel-aluminum-iron alloy plate that can be supported as the front section of the Z-wave generator to increase the width of the Z-wave coverage to improve the safety of space shuttles. .”

"Compressed nickel-aluminum-iron alloy sheets are very strong and can withstand ultra-high-intensity impacts."

"The lowest level——"

After introducing the core technology devices, Zhao Yi moved to the bottom of the spacecraft, which is under the large anti-gravity device. It is the part supported by half an oblate. "Here are the cabins and material warehouses. The cabins are mainly used to carry loads." Small spacecraft, in our design, the spacecraft will have eight cabins, carrying eight small spaceships with different functions."

"At the same time, the outer layer of the cabin and the second energy and power layer also have weapon systems on the periphery. The specific structure of the weapon system requires subsequent design and assembly."

In fact, the weapon system is not important, it can only be said to have 'symbolic significance'.

Because once the first spacecraft is built, it will not be possible to fly outside the solar system, let alone use it to find aliens.

If it were only for the earth, the spacecraft would really be overkill.

Zhao Yi introduced the whole thing in one breath.

He introduced a lot of content. In fact, he only talked about the core technical components. The introduction of the core technical components only talked about the appearance, important functions, etc.

This is the most superficial aspect of the design. If you have an understanding of the relevant technologies, you can almost understand it by looking at the appearance.

What comes next is the key.

Several leaders of the technical group, including Li Jianming, Yu Xin and others, took the stage to explain the design of each part, so that the participants could understand the design of each part before they could participate in the design demonstration.

On the first day of 2022, I wish you all a new year, good luck, abundant wealth, and a bumper harvest in love and career!