Genius of the Rules-Style System

The design demonstration meeting of the spacecraft officially began.

Nearly 500 people attended the meeting, and about 400 people were directly involved in the demonstration work. Each of them can be said to be a well-known figure in various fields.

It is definitely the first time in recent decades that so many professional scholars have gathered together to demonstrate a design project.

When they really devoted themselves to the design demonstration work, they found that the design of each part of the spacecraft was very exquisite. Each part was taken out individually, and it was a very remarkable design.

So many exquisite designs, and very exquisite combinations, together form the structure of the entire spacecraft.

"The spaceship design team is really amazing!"

"This is not just a design, but a huge project completed!"

"The project was done so perfectly that it's not easy to find any mistakes."

"This is the first time I have seen such exquisite design content. It is indeed the work of Academician Zhao. It is really unimaginable."

"What's even more unimaginable is the time. I thought it would take a large team several years to complete such an exquisite design, but it only took them less than three months."

"It is said that the money spent is very small, and it is purely made by a group of people working overtime."

"Amazing!"

Everyone who actually participated in the demonstration work was very shocked. The more they understood the design of each part, the more surprised and shocked they became.

In the next week, every group in the demonstration meeting was filled with exclamations of surprise. It would be a little strange when you don't hear surprise.

It has become a very remarkable thing that a certain group can find some problems in the design, and it will even be talked about by other people in the demonstration group.

After a week of continuous work, the design demonstration work was completed.

In the process of design demonstration, some design problems can still be found. Several problems can be found in each part, but all of them are just minor problems. Even if the design is followed, if errors are found later, they can be corrected. Well, it will not affect the overall spacecraft.

The main reason for the existence of these problems is that the workload is too large and involves too many technical aspects.

Zhao Yi is not omnipotent.

There are so many technologies involved in the spacecraft, and the design alone is extremely complex. He is mainly responsible for the overall design structure, combining the design parts of each group in the best way, so that the entire system can run smoothly. run.

Zhao Yi will also check the design of each part to find out the big problems, but it is not easy to find some small problems, especially the more obscure technical problems.

Therefore, there are still some flaws in the design of various parts.

However, the flaws do not hide the virtues.

The design demonstration meeting of the spacecraft ended, and the design was officially approved.

——

The design is there and the technology is there.

The next step is to finalize the project. Everyone knows that the project will definitely be finalized, but the method of implementation still needs to be discussed.

Previous meetings have decided that by involving other institutions, a more complete spacecraft can be built in a shorter time and with less money.

Therefore, the following meetings will focus on international technical cooperation and several technologies that must be focused on during the cooperation process.

Zhao Yi participated in the meeting and expressed his views on the latest technology.

His opinion is very important.

The latest technologies are all directly related to Zhao Yi, and only he can clearly grasp the relationship between the latest technologies.

In the final meeting, it was decided to focus on three core technologies, which was based on a theoretical basis that could not be disclosed to the outside world.

The three core technologies include space connection technology, anti-gravity barrier technology and Z-wave technology.

Of course, controllable nuclear fusion technology cannot be leaked, but in fact, the main applications of controllable nuclear fusion technology are anti-gravity technology and anti-gravity barrier technology.

In the process of realizing controllable nuclear fusion, another core technology is compressed material manufacturing, and compressed material technology is directly related to Z-wave technology.

Therefore, as long as the three core technologies are not leaked, it is enough.

The bottom line for cooperation with other institutions is that the theoretical basis of the three core technologies is not leaked. During the manufacturing process of the spacecraft, other institutions can even be allowed to visit components such as Z-wave devices and nuclear fusion devices. They only see the components, or I saw the process of component manufacturing, but without the support of theoretical basis, it is meaningless at all.

After the meeting finalized the technical confidentiality bottom line for cooperation in building spacecraft, the 'Spaceship Engineering and Manufacturing Company' was immediately established, and directly invested by 11 large companies including the Aviation Group, Machinery Manufacturing Corporation, and Engineering Manufacturing Company. 80 billion yuan.

At the same time, the news of the establishment of the spacecraft engineering and manufacturing company was also publicly announced by an official statement——

"Warmly celebrate the official establishment of the Spacecraft Engineering and Manufacturing Company with a start-up capital of 80 billion yuan. The company will be responsible for the spacecraft engineering project."

"At the same time, the spacecraft company welcomes the cooperation of international institutions to jointly participate in the manufacturing of mankind's first spacecraft and contribute to mankind's journey beyond the earth and into the universe!"

The official announcement immediately caused a sensation around the world.

There was news before that a spacecraft project would be launched in China, but because there was no official news and no major media reported it, many people thought it was false news. They felt that even if the spacecraft was manufactured, it would definitely be in the next ten years. , things that will happen twenty years later.

Now the official has made a direct announcement and established a spacecraft engineering and manufacturing company, which is a direct statement to start the spacecraft manufacturing project.

This is indeed a big project, some beyond imagination.

When the official made the announcement, they also posted a design drawing of the spacecraft.

This is a logical concept drawing, but the concept drawing is standardized, with names for the components of the spacecraft design.

The design drawings of the spacecraft immediately aroused heated discussion. Anyone who understands the latest technology can understand the contents of the logical concept drawings.

"The top is the space shuttle technology generating device. It's the same as the one installed on the space station. It just has a sharp thing on the front, which looks like a wing to be unfolded."

"The middle part is marked as the energy power module. It should be a nuclear power device. I don't know if it is a nuclear fusion device or a nuclear fission device?"

"Didn't I say it some time ago? The nuclear fusion experiment was successful. Although it only lasted seven hours, it will definitely last longer in the future, maybe even a few months."

"Nuclear fusion and nuclear fission are different. There is no waste in nuclear fusion, the radioactivity is very small, and it is easier to replace the fuel. As long as it can last for more than two months, in theory, it can continue forever, because halfway It can be continuously refilled with fuel, of course, it’s certainly not as simple as refueling a car, but it’s not as complicated as refueling an ordinary nuclear fusion reactor.”

"That is to say, China will soon have mature controllable nuclear fusion technology, but we just don't know what the cost will be!"

"If it can be placed on a spacecraft, the higher cost is acceptable. The most important thing is that this technology can drive the manufacturing of spacecraft."

"The bottom level is a large personnel cabin, which must include a large anti-gravity device."

A lot of discussion in the public opinion has almost analyzed the structure of the spacecraft.

The concept drawing of the spacecraft is also considered to be the standard model of future spacecraft.

In fact, the concept drawing of the spaceship does not look perfect in appearance. Compared with the spaceships in some science fiction movies, the appearance is still worse.

However, this concept map is realistic and the function of each part is obvious.

After seeing the official announcement, many international institutions hope to participate in the spacecraft project, because the spacecraft project will definitely contain some of the latest high technologies, which they do not have. , even from the theoretical basis, I don’t understand it.

It was better if there was no spacecraft project originally. After the spacecraft project is established, not participating in it is tantamount to falling behind. Other participating institutions will definitely make great improvements, whether in terms of technology or theory.

In addition, it is profit.

The spacecraft project is definitely a very huge project, involving hundreds of millions of dollars in funding.

If a medium-sized manufacturing company participates, it may not even have to worry about future orders, and may be able to greatly improve its manufacturing technology.

These are obvious benefits.

However, it is not easy to participate, because science has national boundaries, and other institutions can participate not only if they want to, but also have to deal with some other pressures.

For example, after the spacecraft project was made public, some public opinion even claimed that relevant domestic institutions should be required to disclose the theoretical content of the latest technology, or even require the disclosure of all technical content.

The focus they talked about was the startup technology of space shuttle technology.

This technology was named 'energy ray technology' by the Institute of Mechanics, because in the process of studying mysterious rays, they discovered that mysterious rays can enhance energy.

This is of course impossible.

No scientific research institution will openly disclose it internationally after developing a new technology.

Public opinion lasted for a long time and brought a lot of pressure.

At this time, news suddenly came that the country could not withstand the pressure of public opinion and decided to disclose Z-wave technology?

This news sounds like fake. It is hard to imagine that an unprecedented high-tech technology will be disclosed due to the pressure of public opinion.

However, if you think about it carefully, it seems true, because the news talks about the ‘Z wave’.

Previously, the international name for Z-wave was energy ray. They did not know the term "Z-wave". After the news came out, they learned that the domestic definition is "Z-wave".

"Energy ray, why is it called Z wave?"

"This name is very interesting. Is it because of Zhao Yi? As far as I know, the first letter of the pinyin of the Chinese character 'Zhao' is Z."

"Maybe ZERO? Zero wave?"

"The zero wave seems to make sense. If it is the zero wave, does it mean that the Z wave is a 'virtual ray' and has no physical particle energy?"

"It makes sense——"

A lot of mixed comments can actually guess some technical things, so there are indeed many experts among the people.

Public opinion news is not groundless.

China is preparing to conduct a public Z-wave experiment, but it is not a space shuttle experiment, but a Z-wave strike experiment.

This experiment was not open to the world, and there were no live reports. It was just like a regular exercise, a 'conventional' Z-wave weapon attack experiment, but domestic and foreign reporters were allowed to enter the experiment. Center and command center for regular filming and interviews.

During the interview that day, the reporters thought it was just a routine exercise and were a little confused when they heard about the Z-wave attack experiment. However, they did not have the right to ask questions and could only take some pictures.

Then they saw the command center preparing to conduct the first test.

"First experiment, target preparation!"

"Fighters are ready!"

"take off!"

A fighter jet flying at high speed was displayed on the screen.

It was a light third-generation fighter equipped with a foreign engine that flew at supersonic speeds. The fighter took off with an extremely proud attitude and quickly rose into the sky.

At this time, the commander shouted, "Pilot, prepare!"

"Escape!"

The pilot quickly opened the ejection seat, was ejected from the cabin, and then opened the parachute to fall.

Under the incomprehensible looks of a group of reporters, the commander shouted, "Prepare for strike!"

"3!"

"2!"

"1!"

"boom!"

The fighter jets in the sky didn't even have the strength to resist. They suddenly turned into a cloud of smoke and made a roaring sound.

All the reporters were stunned, "What's going on? Was it hit by a shell?"

"Is there going to be a war? It's terrible!"

"Didn't you see any anti-air missiles? Why did they explode suddenly!"

They didn't understand very much.

Half an hour later, preparations for the second experiment began. A ship appeared on the screen. It looked very gorgeous, but reporters who were proficient in ships could recognize it as a frigate from decades ago.

The frigate sailed quickly at a speed of thirty-five knots.

For a large ship, thirty-five knots is already very fast. You can see the water being separated and quickly sliding to both sides, showing the high posture of the escorting ship.

"Strike, prepare!"

The same slogan was shouted from the commander's mouth, which made all the reporters startled, "Could it be——?"

"3, 2, 1!"

"boom!"

It seemed that there was not even a second delay. The next moment, sparks burst out from the center of the frigate, and soon turned into flames. After more than twenty minutes, the ship slowly sank.

"It's really true——"

"Sinked!"

"But how did it sink? I didn't see anything at all. Could it have been a self-destruction?"