I Am From Yuanmou, The Ancestor Of China, And Was Broadcast Live By Sister Zhou

Chapter 92 I am Nima, you made the Simuwu Ding?!

above the mountains,

In front of the "Imperial Palace" of the Dragon Kingdom.

A "big project" is being closely produced.

"Using so much copper ore and tin ore... What kind of 'monster' is the ancestor planning to cast?"

The water friends in the live broadcast room saw Li Changbai commanding the people to pour ore the size of a human head into the red-hot stove one after another,

Moreover, Li Changbai kept ordering his subordinates to add charcoal to the stove, rub sticks to make 13 "blowers" run simultaneously, and the stove burned more and more prosperously.

So much copper ore was poured into the furnace all at once, which inevitably caused confusion among netizens.

Melting copper juice, the amount of copper ore used this time... far exceeds the last smelting!

"not enough."

Li Changbai glanced at the "copper juice" in the stove, and it was only half of what he expected.

"Hoo hoo!"

He ordered the tribe again to drop two kinds of ore into the furnace.

"not enough?"

The water friends in the live broadcast room were stunned,

"Could it be that the ancestors of the Yuanmou people planned to refine a giant this time?"

Professor Gu Nian frowned, looked up at Li Changbai who was instructing his tribe to pour copper ore into the Huo 500 furnace, and then murmured:

"The bronze ware refined by the ancestor this time... is it a tripod?"

"Old Su, what do you think?"

Gu Nian took out his mobile phone and dialed the number of Academician Su Bingqi, Department of Archeology, Qingbei University.

The two of them are close friends, often discussing at academic conferences, and have frequent exchanges.

"It should be Ding."

Academician Su's deep and vicissitudes voice came from the other end of the phone.

"The ancestors of the Yuanmou people should have planned to make bronze cooking utensils."

Academician Su apparently also noticed the cracks on the bottom of those clay pots, guessing that Ji Changbai was planning to make a tripod that could cook food.

"Well, it should be a tripod." Professor Gu Nian said in a deep voice.

"It's just a little strange. If you want to make a bronze tripod, no matter if it's a four-legged square tripod or a three-legged round tripod, you shouldn't consume such a large amount of ore..."

Teacher Gu Nian looked up at the live broadcast room, and his eyes fell on the "copper juice" in the stove.

Both he and Su Bingqi are top experts in the field of archaeology,

Naturally understand the amount of "copper juice" needed to make a "bronze tripod".

The "copper juice" in the furnace is enough to cast 5 bronze tripods!

"Old Gu, let's wait and see (cacf), I always feel that this ancestor is not simple..."

"Maybe........this time will bring us a surprise......"

Academician Su hung up the phone, then looked at the live broadcast room, his eyes lit up, and his face was full of anticipation.

"Hoo hoo."

Li Changbai glanced at the "copper juice" in the stove and nodded with satisfaction.

"The amount of copper water is enough, you can start casting.

The method of casting bronze tripods is still the "Fan casting method".

The first step, model making.

"The height of the tripod is 133, the length of the mouth is 110, and the width of the mouth is 78.

Li Changbai murmured in a low voice, and began to make molds according to the data of the tripod provided by 999 kinds of bronze wares."

First use clay to knead the prototype of the big tripod,

"The four corners of the abdomen, the middle of the upper and lower edges, and the upper part of the foot are all placed on the edge of the door"

According to the data given in the design drawing, Li Changbai spent half an hour making a "mold".

This square tripod has two "Ding Er", Li Changbai plans to cast the tripod body first, and then cast it in a fan.

The prototype of the "Ding Mo" was formed, and Li Changbai set it aside to dry.

Then he took out the sharp bronze knife and began to carve.

The body of the tripod is carved with "panlong pattern" and "taotie pattern".

"What kind of tripod is this?"

Academician Su Bingqi looked at the "Ding Mo" and said in surprise.

He has studied bronze wares for 50 years, and naturally knows the "dragon pattern" and "taotie pattern"

However, the body of the tripod has not yet been cast, and he does not know the true appearance of the tripod.

"This bronze tripod.....is too big...."

However, the size of this gigantic cauldron still frightened the mature and stable old academician.

"You're done!"

Li Changbai was very satisfied when he saw the "Ding Mo" carved with lifelike patterns.

next,

After the "Ding Mould" is dried,

Carry out the second step of smelting bronze ware,

Spread grease on the dried "Ding Mould", continue to cover the pottery clay, and press hard, so that the patterns on the tripod body are firmly printed on the pottery clay.

Afterwards, the clay was removed and set aside to dry.

"The second step, 'Fan Fan' is finished!"

The corners of Li Changbai's mouth curled up slightly, he was becoming more and more proficient in this "bronze casting technique".

Even the water friends and experts in the live broadcast room couldn't help but praise their supernatural ancestors:

"I can assure you that our ancestor's bronze casting technology is first-class in our China, and he is also a super expert!"

"In martial arts novels, it is the famous blacksmith master all over the country. A martial arts master like Ximen Chuixue Ye Gucheng Xie Xiaofeng asks the ancestors to help them forge famous swords!"

"The engraving of the Taotie pattern is too lifelike, even better than that of me, a designer who graduated from the Central Academy of Fine Arts..."

In the admiration of the water friends in the live broadcast room for Li Changbai's bronze casting skills,

Li Changbai started the third step,

Put the pottery clay printed with Taotie patterns on a stove with a temperature of more than 1200 degrees to bake.

Later, Li Changbai produced "Nei Fan".

Then take out the "Tao fan" and fit it closely with the "inner fan", and tie it tightly.

Subsequently,

Li Changbai made "Ding Er" again with clay

Repeat the above steps to get the "Tao Fan" and "Nei Fan" of "Ding Er"

"This 'Ding Er'......

Su Bingqi frowned, looking at the two "tripod ears" with some doubts

He smelled a familiar smell.

"It shouldn't be..."

"It's absolutely impossible.

After Li Changbai completed the internal and external models of "Ding Body" and "Ding Er",

First pour a large amount of "copper juice" from the "casting port" to the body of the tripod,

Then put the inner and outer molds of the "Ding Er" on both sides of the "Ding Body", and also pour "copper juice" into it.

"It's done."

After doing all this, you only need to wait until the "copper water" cools down,

Then tap on "Hefan"

Large bronze vessels, after being poured with hot copper juice, cooled very slowly.

Li Changbai waited for three full hours,

Only wait until the copper juice is completely cooled.

"What could it be…………."

Sister Zhou held up her mobile phone, and the camera was aimed at Li Changbai, who was crushing "He Fan",

Her mouth was dry, and she watched eagerly, her face full of anticipation.

at this time,

The soil particles shattered and fell from the cauldron, revealing a corner of the tripod's ears.

Su Bingqi's whole body froze, and his expression was blank, as if his soul had been extracted:

"That is...………"

"Simu Wuding!!!"

(This chapter is a bit stuck today, I will continue tomorrow and write it in the morning).