reborn industrial empire

Chapter 441: On the right track

I have already vomited blood, please help me! I am crying and asking for support!

"To overcome these technical barriers, we mainly need some special machinery. At present, we have manufactured most of these machinery by ourselves and imitation, such as high-frequency quenching machines, composite sheet welding machines, high-frequency

Welding machines, super audio machine chuáng guide rail integrated machines, online through forging forging furnaces and other equipment. We can already order these by ourselves

It has been built, but there are still some machines that need to be invested in and continued research, and have not yet been conquered, such as complete sets of equipment for quenching the inner wall of pump tubes, and equipment such as CNC induction quenching machines. We still need further research on these, and may need to hā

In the past period of time, as well as funds, I had to rely on the boss to give me the green light..."

Zhang Hainan said to Jin Xiaoqiang with a half-joking smile.

"Haha, no problem. Don't worry, Lao Zhang. My attitude toward your machine and equipment research team is that I will absolutely support you at any time. Don't worry, whether it's in terms of manpower or material resources, as long as you, Lao Zhang, and I open our mouths.

, I will never say no."

For this kind of equipment manufacturing industry, we need to provide support. If the state doesn't do it, we will do it ourselves.

Equipment manufacturing such as this machine manufacturing industry has always been a highly capital-intensive and technology-intensive industry. It is different from those high-energy-consuming and low-output manufacturing industries that are low-capital-intensive and highly human-resource-intensive.

Those bullshit manufacturing industries can only produce shoes, shirts, and toilet paper, but what our own manufacturing industry produces is industrial mother machines, an important direction for future scientific development, and an indispensable cornerstone of our industrial empire.

I have made some good money in the past two years, but what is the use of this money? If it is not used in these industries that will lay the foundation for my future industrial empire, will it be used to spend time, drink and compare wealth with others?

If that were the case, he would have been kicked in the head by a donkey. Jin Xiaoqiang was not that stupid.

As long as you master these advanced technologies, you don't have to be afraid even if you have no one in the upper echelons of the country. Many ministries will do things based on your appearance.

If I am not happy, at worst, I will move all the technology and enterprises abroad, that is, let some relevant domestic departments obtain certain relevant information, and their lay leaders and experts will be in the 21st century.

He also likes to take the lead in politics and likes face-saving projects the most, but he also cannot acquire such technology.

"Haha, with what you said, Mr. Jin, I can rest assured. Hey! When we were building machines in the past, it was really..."

Zhang Hainan recalled that when he was working as a machine builder in a state-owned enterprise, he wanted to apply for special research funds. It was a difficulty. The leaders would rather buy themselves a few good cars than spend the funds.

And as long as foreigners are willing to sell technology, they will sell it, completely ignoring that such technology has already been eliminated by others. If they don't insist on it, they have completely ruined their own R&D brain.

The current boss Xiaojin is really good. Even though he is not a big person, he is very courageous. Now the Machinery Research Institute has produced knives that can bring profits to the company, but this profit is probably not enough for them to fill the gap. Now they are digging out

What about this pitfall, but people don’t blink an eye and are still willing to throw money into it. If a boss like this doesn’t follow, then who else should he follow?

The two of them were chatting and wandering around the research institute. They were just listening to Zhang Hainan introducing the trends in machine body research and development, and did not have time to take a closer look at the work in the vehicle laboratory.

At this time, I happened to walk into an empty hall and saw five or six students, wearing dustproof suits, standing in front of a machine bed, watching the processing inside through the protective glass window on the outer shell of the machine bed.

Condition.

"Huh? What kind of plan is this?"

Seeing the machine placed in the middle of the hall, Jin Xiaoqiang felt a little unfamiliar, as if he had never seen it before.

"Haha, isn't that the Mazakxxx that you allocated to us before?"

Zhang Hainan took a look, then smiled and said to Jin Xiaoqiang.

"But...but I remember in the past, this computer chassis is not like this? It doesn't have a casing, right?"

Jin Xiaoqiang remembered that this machine should have been a luochuáng before, and there was no such protective shell on the outside.

"Yes! It didn't happen before, but then didn't we conduct experiments on our self-produced tools? At the beginning, because we were afraid that the quality of our self-produced tools would not be up to standard and the tools would collapse during processing,

So we installed a protective case on this machine..."

Zhang Hainan explained to Jin Xiaoqiang with a smile. Jin Xiaoqiang only understood after hearing this, and then said to Zhang Hainan with some seriousness.

"By the way, I ignored this. In the future, the machines of your Machinery Research Institute must be equipped with a protective shell. Compared with these machines, the safety of you scientific researchers is more important to me.

That's the most important thing. Remember, we must form a good habit. Even if we can produce machine boxes ourselves in the future, we must not forget to install a protective shell on the outside."

You may have seen foreign machine hoods, and when comparing foreign machine hoods with domestic machine chests, the most obvious thing is that the foreign machine hoods have an additional layer on the outside of the entire machine bed, which looks like a subway car.

It's something on the ground, and when you enter the processing area, the protective shell outside will open.

As for our domestic machine, it is a machine with all the shells on the outside, and there is no protective shell at all.

This protective shell is not to protect the machine tool, but to protect the operators of the machine tool, because the current machine tool maintains a high speed during processing, and the cutting tool is in contact with the processing tool.

A harsh sound will occur every time, and if the quality of some tools is not up to standard, it is very likely that the tool will break and fly out during processing.

The power of the broken knife flying out from the high-speed machine gunship is no less than the bullets flying in the face. If it is hit, it is not a critical part. If it hits the vital part, it will be killed on the spot.

.

In China, countless workers go bankrupt every year due to the use of inferior domestic machine tools. However, domestic machine tool manufacturing and purchasing companies still go their own way, regardless of the safety of their workers.

Most of the casings produced and purchased are casing-less casings.

Such a situation is absolutely undesirable in Jin Xiaoqiang's view, because in his view, nothing is as precious as human life, so he gave Zhang Hainan a fatal order, that is, no matter what others do in the future, our Hua

Even if an anodizer can produce machine tools, our products must also be equipped with a protective shell on the outside.

"Well, don't worry, boss, I know!"

Zhang Hainan was a little touched by Jin Xiaoqiang's sentiments. Indeed, in China nowadays, bosses like Jin Xiaoqiang who can truly put the personal safety of workers first are really rare.

"By the way, I heard that your tool development has been very successful recently. You have produced many kinds of tools?"

Jin Xiaoqiang suddenly remembered that Zhu Junxi had reported to him that Zhang Hainan and the others had developed a lot of knives, and he couldn't help but ask more questions.

"Haha, yes! The biggest breakthrough we have made in cutting tools recently is the boron nitride coating process. Mr. Jin, you also know that although we can also smelt a lot of special steel cutting tools, although this

Knives can also bring considerable profits, but now Americans, Germans, and Japanese

Many of people's knives are not made of special steel like ours. Many of them are ordinary steel with relatively high hardness. However, they use coatings like boron nitride on these knives, which is very important.

It solves the problems of tool hardness, high temperature resistance and corrosion resistance..."

As soon as the opportunity was mentioned, Zhang Hainan became extremely excited and began to talk non-stop, but Jin Xiaoqiang didn't care, he just liked hearing these tunes.

To him, the pleasure of making breakthroughs in science and technology was like the protagonist in those martial arts novels who obtained martial arts secrets and made breakthroughs in practice, which made him feel very happy.

"In the process of improving the technology of tool coating this time, we adopted new ideas and did not use the previous vapor deposition method. This method is too old and can easily cause uneven coating thickness and uneven application.

Question. I checked some information before and found that Oerlikon Balzers was exploring a new method of spray coating, so we followed their ideas and conducted some explorations, hehe

!The result is really made for us. This and that technology mainly uses high-intensity pulse magnetron sputtering technology, as well as pulse plasma technology, etc. But our pulse machine also has some technologies

We are not as advanced as the Germans, so we can't achieve the level of coating precision they have, but for our current domestic situation, it is enough..."

When talking about such technical issues, Zhang Hainan's eyes gleamed endlessly, and Jin Xiaoqiang also listened with gusto. Although there were many key technical terms that he could not understand, it did not prevent him from enjoying this.

The thrill of a technological breakthrough.

Finally, China's equipment manufacturing industry has been put on the right track by a little butterfly like myself. Although it is only a small step so far, such a small step will have a huge impact on the equipment of the entire China.

For the manufacturing industry, it is a big step...

www.ptwxz.com