reborn industrial empire

For anyone who has been engaged in the machinery manufacturing industry, equipment manufacturing is well aware of the importance of this industry. In terms of the entire industrial chain, this industry can be said to be at the most upstream of the entire industrial chain, because there is this industry

It was the pure existence that gave birth to the modern manufacturing industry in all walks of life.

Because this industry can manufacture a variety of industrial machine tools and production lines, and these machine tools and production lines directly serve various mechanical processing industries.

It is precisely because of these industrial machine tools and production lines that modern people can live in an era of abundant products.

As Han, who has been engaged in industrial processing for more than 20 years, he is quite aware of the gap between my country and foreign countries in this field.

When Han Xiufu was at the No. 1 Machinery Processing Factory, he went to several brother factories in the south and southwest for exchanges, where he saw several foreign machine tools imported by others.

When he saw those Yamazaki or Mazak machine tools that others imported from Japan, Han Xiufu knew that we were really far behind them.

The machine tools at that time were just three-axis machine tools, and they were not the most advanced foreign machine tools. However, they were able to integrate several steps such as turning, milling, planing, drilling, etc., and perform integrated molding on the workpiece. This was much better than theirs.

At that time, there were a lot of old machine tools from the former Soviet Union used in factories.

Not to mention in terms of accuracy, the most important thing is that once the machine tool is turned on, mass production can be achieved and the defective rate can be reduced. However, the No. 1 Machinery Factory where they worked at that time still relied on machine tools for rough machining.

, and then perform subsequent manual processing, not only the defective rate is high, but the work efficiency is also low.

That inspection trip to the south was a big shock to Han Xiufu. Fortunately, the equipment of those companies are generally used in military industry rather than people's livelihood. Otherwise, their No. 1 Machinery Factory would have been severely damaged.

The market impact was greater and the market collapsed earlier.

Later, after returning from the south, the leaders of the First Machinery Factory also planned to introduce such sets of machine tools from abroad, even if they were an era behind the world. Unfortunately, the time to catch up was not good, just in time for the disintegration of the former Soviet Union, and Europe and the United States

The country immediately ended the honeymoon period with China and once again imposed an embargo on China. This plan later came to nothing.

After that, the First Machinery Factory celebrated the New Year with Wang Xiaoer, and each year was worse than the previous. In the end, it ended up going bankrupt. After that, Han Xiufu never thought about modern machine tools again, which was what bothered him the most at that time.

The problem is the livelihood of a family of four.

What he didn't expect was that just a few years later, when he spent more than three months as a worker on the final assembly line of Huayang Power, a private company, he himself would return to equipment manufacturing by some strange coincidence.

This industry has touched upon machine tools again.

It's just that the machine tools he faced this time were different from the old machine tools from the former Soviet Union that he was most familiar with before. It turned out that the old machine tools supported by the former Soviet Union that he used could only perform some simple turning, cutting and drilling.

work, and the precision is incomparable to what it is now.

Now, after he was recommended to the equipment design and production department by the company, the machine tools he came into contact with were all either German or Japanese.

Looking at those machine tools, Old Han was filled with emotion. Although he did not read much and was not highly educated, he could tell at a glance that these were definitely the top machine tools in the world.

When he first entered the equipment production and manufacturing department, Lao Han felt very confused because he didn't understand the operation methods of these machine tools at all.

Every time these machine tools process a workpiece, a large piece of work material is fixed on the fixture. Then the staff who operate the machine tool will return to the operating table and tinker with this and other things on the computer touch screen.

After that, the processing area will be sealed by an automated sealing equipment similar to a subway door, and then a robotic arm will appear, using various props to perform turning, cutting, planing, drilling, and even grinding processes on the work material.

Standing in front of the glass window of the sealed hatch, in just twenty minutes, I saw a large piece of iron ingot turned into workpieces after being polished and carved by the mechanical arm changing various tools.

The processing process simply left Han Xiufu stunned!

In just a few short years, it turned out that the world's machining industry had advanced to such an extent that Lao Han was completely shocked.

He has seen engineers who operate machine tools use this kind of machine tool to process the bearings used in the company's automobile gearboxes. You must know that it is a workpiece that uses special steel, is extremely hard, and requires extremely high machining accuracy.

In the past, when Lao Han worked at the First Machinery Factory, he had also processed such workpieces, but at that time, he had to rely on old machine tools to process a roughly similar workpiece, and then the workers would carve and polish it hand by hand, which was time-consuming.

It doesn’t take much effort, but the defective rate is extremely high, and the cost is also extremely high.

But here, people only need to press a few buttons on the computer and spend only 20 minutes to complete the work that it took a working group several weeks to complete before.

This made Lao Han feel extremely frustrated. He felt that he was completely behind the times. He was originally proud of his skills, but now, he felt that these skills were useless in the face of modern machinery.

This situation continued until one day when Zhang Hainan, the director of the equipment design and production department, conducted a meeting with Lao Han and other old technicians with the same age and experience as him who were also recruited into the equipment design and production center.

After the conversation, everyone's mood improved slightly.

Some of these old mechanics are Lao Han’s former colleagues at the No. 1 Machinery Factory, and some are old mechanics from other companies in the city. Each of them has his or her own unique skills. Some are great in the field of electric welding, some are good at turning, and some are good at turning.

Some are good at polishing, and some are good at playing with electric drills. In short, they all have their own strengths and can be regarded as highly skilled workers.

However, after seeing the power of modern machining centers in those two days, everyone was very depressed because they all believed that they were no longer useful to the company, and those modern machine tools, also known as machining centers,

None of them can operate it.

"Haha, what's wrong? Everyone seems to be in a low mood these days!"

Manager Zhang came into the conference room with a smile and made such an opening statement.

"Can you get excited? We were originally engaged in machining, but after we came here, we discovered that our skills are nothing compared to these machine tools."

Han Xiufu had a short temper, so he took the lead in speaking when other workers didn't speak. These straightforward workers really didn't understand why the company would transfer them to this department.

"Well, that's right. Indeed, to be honest, the total productivity of you people combined is not as good as a machine tool outside."

Supervisor Zhang's words were so naked that the faces of these workers heated up. Many of them felt very unconvinced, but after careful consideration, they were indeed right. With just such a bearing, the total cost of these workers is estimated to be

It takes two weeks to make it, but it may not be as accurate as a bearing that takes twenty minutes to make with a machine tool.

So everyone was silent, but Manager Zhang did not continue to be silent, he continued.

"But have you seen it? Which country's logo is posted on the machine tools outside, and which country's text description is used?"

Manager Zhang's next question surprised the workers. Didn't they all say before that those machine tools were either from Germany or Japan?

"Yes, I think you have all heard that those machine tools are either from Germany, Japan, or even the United States, but we don't have any of our own! You also heard about it before I was transferred here.

The department is called the Equipment Design and Manufacturing Department, so I want to tell you that my department not only produces the kind of automobile bearings you see, but also produces these machine tools you see, what do you think?"

Supervisor Zhang's words were like a thunder that struck his ears, and all the workers present immediately exploded.

"What? Director Zhang, you said we also want to produce machine tools like that?"

"Really? Director Zhang, just tell me, what do you want us to do?"

.............................

The quality of the older generation of workers is not impeccable. Many of them have participated in some national projects. They have participated in many projects such as national battles. When they participated in those projects, their enthusiasm for catching up with the Premier League and the United States suddenly disappeared.

Back to them.

Who said we Chinese people can't make good machine tools...

"Yes, we just want to make machine tools. The reason why we have called you all here and let you visit those machine tools first is to give you a general impression of modern machining centers. You must know that these machine tools are also human beings.

The processing was done by people first, and then these machine tools, like other so-called machines in the world, were created.

Compared with high-precision machinery or production lines, in fact, these machine tools require the highest precision. If we want to make such machine tools, we do not have such advanced equipment in China, so we can only rely on you to process products with higher precision than these machine tools.

A higher industrial base machine, and then there will be machine tools like this..."

Supervisor Zhang's words made these workers feel like they were enlightened. It turns out that this is the case. We were really invited to build machine tools.

After the meeting that day, the attitude of these workers changed. Although many of them were not highly educated, they began to learn to hold some foreign language materials, recruit people for advice everywhere, or go to those young people.

Machine tool operators learn how to operate modern machining centers and then begin to understand how machine tools work.

After that, Supervisor Zhang led everyone to dismantle the machine tool, do surveying and mapping, and then reassemble, disassemble, and reassemble. After that, everyone figured out how to process some workpieces...

{PiaoTian Literature www.PiaoTian.com thanks all book friends for their support, your support is our greatest motivation}