Starting from Zero

Chapter 161 of Chapter 16 from the beginning

After answering my answer, Ryuki Hatomoto said immediately: "We thought that my sister would have to wait until tomorrow morning. I didn't expect you to be here so soon. Our liquefier is very clogged. It is no longer working . Please clean it up quickly! "

"Oh. Take me to see" The words liquefier have a huge impact on me. After all, I came here for this thing. It ’s not easy to see what it is.

I probably didn't expect anyone to come here. Ben Long took me into the core area without even paying attention to identifying me. In fact, the parties that have passed between them can only be regarded as the peripheral area here. It has no effect on the core here. That's why defense is so lax. But since entering the door, the situation has been completely different. This can be said to be five steps, one post and ten steps. If Ryuichi Hatomoto was next to me, a raw face like me would never be mixed in. Speaking of which is really lucky this time.

As we followed Hatomoto Ryu through a large laboratory, we reached a pure white room. This room is different from normal rooms. Because it is a regular octagon. And the center has been completely occupied by a huge machine. Only left a passage that barely walked. I took Ben Long to the side of the machine and said, "The structure of this thing is really too complicated. Our technicians have been busy for days and haven't figured out what is going on. Now it can only be a third. The magic crystal liquefaction is carried out at all the degrees. If the other three machines are running normally, our production progress will be greatly affected. So please repair it as soon as possible! "

I nodded and said to Mr. Hatomoto: "I can't see from the outside what went wrong. You can stop the machine first. You need to take it apart for inspection."

"Okay. I'll go now." As soon as Ben Long left the room, I began to observe the thing in front of me. It sounded like a soymilk machine. It's many times bigger. At the top of the machine is a huge feed opening. There is a big hole in the roof. A large number of white magic spar is sliding into this inlet continuously, and the bottom is sealed under the board. So I can't see everything. I was watching a sudden sound above. The hole above the feed opening was sealed by several steel plates. The surface instrument quickly liquefied and transported all the remaining magic crystals. Without feeding, the machine entered idling. At this time, Hatomoto took five people in white coats. One of the fast-moving instruments pressed a few times on a panel and the device gradually quieted down, apparently it had been shut down.

"Ms. Miyako let me introduce you. Four of us are technicians behind Yamashita Matsushita, and four are Takahashi Ryosuke, Abe Shinmei, Otako and Kawaichi Yuichi. They are all excellent technicians, but the failure is really strange It's up! "

"Hello. Please advise. But we are in a hurry, so let's not waste it. Let's get started."

As soon as Ben Long heard that we were about to start working, he immediately said, "I have nothing to do here, so I'll wait here and ask everyone."

"Team leader rest assured." Several people immediately replied: "Ms. Miyako helped believe that we can solve the problem soon."

Hehe. What you guarantee is simply. I do n’t understand how this thing works. However, I won't let them know this now. In any case, let me study the structure of this thing first. Besides, as long as I can figure out the principle, I can copy it back. It is a pity that I am not a professional magic crystal technology researcher or I can get more details. However, I am also a dragon, and I dare not say that the memory is superb, plus that I know the technical knowledge of the real world. So it should not be completely blind to what is in the game.

Because the woman I am posing as is a technician from the headquarters, I have become the leader of the five of them in terms of working relationships. I don't need to do specific things. First I instructed these people to remove the shell of this thing first, and then to remove some surface structures that I can understand at a glance. Anyway, I am trying to steal manufacturing technology and not really intend to help them repair the machine. What if I can't go back without disassembling it?

"Hey you. Take this down." I ordered, pointing at a large part.

"Ah?" The guy I ordered looked at me in amazement and said, "Miss son. Even if it is turned off. But there is still dangerous high voltage in the RF oscillator. Is it too dangerous for us to dismantle it like this? ? "

"Asshole. How are you technicians? Remember that you are technicians. Soldiers can kill lives on the battlefield. We technicians can also kill lives on the maintenance yard. This is the basic conduct of technicians. Don't you even understand this? The Japanese's superior-subordinate relationship is clear. So the harder it gets, the less it matters. On the contrary, it is too polite and easy to be seen. really. Those guys were in awe of me immediately when they were scolded. With a sleek move, he removed that oscillator. After this thing was dismantled, it was pretended to be a serious and hands-on to open the shell of the thing. Inside it are a bunch of complicated poles and pipes. But I remembered the entire structure with extraordinary memory. of course. I don't just leave this thing there. After carefully disassembling several of its pipes and then checking them out, I muttered quietly holding a part and thinking about it. Although I don't know what I'm talking about. But those guys stuck their ears like donkey ears and listened to the content of this senior technician's thinking. Of course they are clear of everything.

"Hell!" I said loudly.

"Ah? Are you having any problems?" A technician asked nervously.

I shook my head. Then he asked, "What did you suspect at first?"

"At first, we suspected that the power reduction caused by the aging of the circuit of the shock resolver caused insufficient liquefaction of the magic crystal. Some of the particles were dropped into the molecular centrifuge without being liquefied, and the passage was blocked. Check it? "

"This one……?"

"Is there anything?"

"You know what we are ..."

Seeing them chubby, I know they must be unable to repair the machine because they are not qualified to open the core components. Although they know where the problem is, they are not allowed to open the core components.

Research institutions in all countries are the same. For confidentiality. Important settings-Only the inspection can be opened. So many ordinary technicians know the problem but dare not start.

I nodded to understand what they meant. Then he said, "I'll be here. I have permission to demolish it."

"Yes." These people were clearly excited. Of course, they started disassembling the parts while I was watching. To be honest, the structure of this thing is complicated. The surrounding equipment is of great help. So after seeing the structure, I can guess the specific purpose and principle. As for the individual who cannot understand, I will let those technicians analyze for themselves whether there is any possibility of damage to these things. On the face of it, it seems that I am guiding them. In fact, I am listening to their analysis to speculate how these things work.

Soon the big guy got stuck in pieces. The room was full of various parts. And even the lower instrument room was messed up by us entering and dismantling. Basically, we can tear apart anything that can be seen at a glance. Although I haven't figured out how the last core component works, I already have a general understanding of this thing. The top of the first thing has a feeding mouth. The magic crystal will enter a shock room after entering. This chamber is connected to an instrument called a high-frequency magic oscillator. This instrument is the key core of the whole equipment. The liquefaction of the magic crystal is completed by it. But the liquefaction process is not so simple. Below this oscillating room is a device called a magic suppressor. According to the language of several technicians, I speculated that this thing played a role in suppressing explosion during the magic liquefaction process. Later, I found that the start-up detector of this thing was also connected to the power switch of the liquefier, so I speculated that this was equivalent to a safety insurance. If it stops, it will shut off the operation of the liquefier, so it will not cause an explosion. Without this control switch. Then once the suppressor suddenly stops. The liquefier is still working. The liquefier would instantly turn into a small nuclear bomb.

Below this liquefier and suppressor is a diversion tank.

This thing is also very particular about it. It's not just a pipe. It is actually a vibration separator with a cooling device. The liquefied magic crystal will be filled with an unknown liquid in this diversion tank. But this liquid will eventually be completely separated. I don't know the reason for this. It is also convenient to ask directly. I am posing as a senior technician now. If I ask such a question, it will be exposed immediately.

Connected below the deflector is a molecular centrifuge. This thing is a bit like a dryer of a washing machine. But the function and structure are thousands of times more complicated. Fortunately, we have guilds. What. What do you ask us to do? Don't know that nuclear fuel is all separated by a centrifuge? Of course. There is no atomic bomb in Zero. There is no radioactive material here either. Ours is another thing-colorful magic spar. Colorful magic crystals exist in regular magic crystal mines. It's just that these colorful magic crystals are very small particles. It cannot be extracted without a centrifuge. It just so happened that there would be a great demand for this thing. Therefore, naturally, a special equipment for extracting colorful magic crystals was prepared.

The centrifuge on the Japanese magic crystal liquefaction equipment is used to separate impurities from the magic crystal after liquefaction. It is inevitable that some other things will be stained on the surface of the magic crystal during the mining process. In addition, the magic crystal itself has few pure individuals. So after liquefaction, a pile of impurities will come out. At this time, a centrifugal separator must be used for separation. But the power of this separator is not great. At the end of the separation, there are still impurities. This qualitative magic crystal solution will flow into a huge container below and then be pulled to another room for subsequent processing. But this is not the part that this machine is responsible for.

After understanding the principle, I pretended to analyze and repair this thing with those technicians. In fact, they can do this themselves. No senior officer looked at them and dared not dismantle. So I can't fix it all the time. After I hummed and "guided" them, they immediately found out the problem of this thing. Just as they guessed. The power line of that carburetor was aging because it had to withstand high frequency vibration. Now the lack of power has caused a large number of magic crystal fragments to separate the machine without liquefaction. Finally, the outlet of the separator was blocked.

After finding the cause, it will be eliminated soon. Several people replaced the moving line. Then began to load parts back and forth. Because the disassembly is too cool. The house is now full of parts. It's not a one-and-a-half time to put it all back together. of course. Because I'm posing as a woman now. Plus the rank is higher. Therefore, this kind of assembly work without technical content will certainly not be my turn. There are only three things I care about now. the first. What kind of composition and specific purpose is the solution added into the liquefied magic crystal in the early diversion tank? second. How does that magic shaker that can liquefy the magic crystal work. third. What other treatments are needed for the liquefied magic crystal with impurities?

The first and third technicians should know. But I don't want to ask. So I can only go to other ways to find a way. As for the second one. This is probably not even clear to a technician ~ www.wuxiaspot.com ~ That's the core.

"You guys are here first. I'm going out to ventilate. The motor oil is too heavy here." I pretended not to like the air out of the room. Hatomoto Ryuichi just passed this way. Seeing me coming out immediately asked me in amazement: "Miss Miyako? Why did you come out? Have you fixed it?"

I nodded: "It's not a big deal. It's finished. Several of your technicians are assembling the previously dismantled parts. When they are finished, they can be used normally."

"Senior technicians are really extraordinary! You can solve the problem that they have spent a lot of time in less than three hours. It's amazing!"

"It's nothing." I replied very modestly. And just in front of this a security guard came over.

"Supervisor. The security check in the port area says Miss Gong has arrived. Take her in in the past. I don't know the way here"

"Oh. Ok. You tell them I'll send someone to pick them up ... wait. Who do you say they asked me to pick up?" Hatomoto Ryuichi suddenly got stuck halfway. Because my dagger was already on his neck. I didn't expect to be exposed at this time!