Skynet Architect

"Dong dong dong!" There were three knocks on the door in the conference room, and then Si Fan and his secretary came in. After the two came in, they went directly to the main seat and sat down.

"Hello, I'm Si Fan. I think today's meeting can start." Si Fana stretched out his hand to invite them to speak.

Professor Carlin was already ready.

"Dear Mr. Si Fan, you must be aware of the purpose of our visit today. We are going to complete the manufacture of a new type of CNC machining center. In terms of specific parts, we need parts with particularly high performance and processing technology. We hope to seek cooperation. In the company The metal or parts we need are manufactured in Mr. Fan's factory." After Professor Karin finished speaking, he began to press the switch.

The ppt presentation was displayed on the computer screen. In front of him was a very high-tech machine tool. He was the one who appeared at the very beginning. He was about five or six meters tall and could completely process large workpieces.

"Our design is a universal machine tool, which can clamp large workpieces as well as small parts. At the beginning of the design, it was aimed at being the world's manufacturing and mother machine factory."

During Karin's introduction, Si Fan also gradually got to know this super large machining center.

It's just that some things inside them still frown.

"It seems that all the cores of this machining center are extended around this cardan shaft system, but other aspects seem to be not much different from ordinary machining centers, right?" Si Fan said.

This is very important. During processing, the current situation has not changed much, and the work efficiency is still very low. In Si Fan's eyes, this is a serious waste of one's own resources. Using top-level cosmic metals, This is how to improve the processing ability by such a small amount?

Professor Carlin on the opposite side looked at Si Fan's obviously dissatisfied expression, and was also a little frightened. He knew that Si Fan should be able to find a solution here. But obviously Si Fan's request is not limited to this.

At Si Fan's request, he suddenly thought of the fantasies of some former students and their professors.

It can only be said to be crazy, because these things are what they say seems funny, and they cannot be completed.

But Si Fan said now, what should they do?

"Actually, we should be able to complete the overall design, but the requirements for materials and technologies used are really too high. It can be regarded as our imagination for the future." Professor Carlin is a very down-to-earth person, completely seeking truth from facts Explain with Si Fan.

Looking at the regular ppt in front of me,

Well, at least Si Fan seems to be a well-behaved machine tool, and he is more interested in that fantasy.

"Actually, the materials we can provide you are very, very special. If you can meet our requirements, our Skynet Group will provide you with this special metal."

"The amount of material is not very large, about a little more than a hundred tons, and if there is more, it will really be gone. There is no doubt about the performance of the metal. You can consider the ideal limit."

"However, the design must meet my requirements, otherwise you can only get the most basic materials provided by Skynet Group, that is, the high-quality alloys we produced in the volcanic furnace. These alloys should barely meet your requirements and can be used in manufacturing."

What Si Fan said made the eyes of these professors shine. She discovered that the Skynet Group actually has better things. The best metals are actually limited in quantity, but they can be designed according to the limits of imagination. .

This is simply the gospel for them.

What they consider is always to increase the current machine tool equipment according to the current metal performance.

And when Si Fan's words came out, there was not enough innovation in their heads, and they could only rely on their own students at this time.

He remembered that his students had said many unreliable ideas, of course, that was the design of his dream a hundred years later.

He turned to look at his apprentice Carter.

This is a young man. He has profound knowledge, but he doesn't have much experience. He is just an impulsive young man who is ignorant. He usually loves to dream and has ideas.

But his ideas are generally unreliable.

Now that unreliable ideas come across unreliable projects, we can only see if we can see those metals.

He believed that if he could see the metal, he would have better ideas.

Carter never thought that there would be a day when he would have a show. He stood up in a daze, almost subconsciously, as if answering a question in class.

"Mr. Si Fan, I once imagined that the real CNC machining center should completely subvert the current form, from the clamping process to the real cutting process."

"Our current machine tool clamping uses heavy and fixed clamping. Most of them need to be clamped multiple times when cutting, which will cause errors. If we use multi-point clamping, then These can be avoided. Or from the beginning, he has been clamped flexibly, and has been re-fixed countless times." Carter is introducing his design.

What he conceived, Si Fan asked the system to help build it.

"Tell me, I'll arrange someone to implement it for you on the computer, and you can make minor adjustments," Si Fan said.

At this time, Carter can freely describe the machine tool in his goal according to his own ideas.

The machine tool he was talking about was really completely different from what these professors said.

In his mind, this machine tool should be 360-degree clamping with no dead ends, and there are clamped parts at every position, just like a planet, the parts are clamped in midair, with a daily orbit and a monthly orbit. One of the two rails is for clamping and the other is for cutting. They do not interfere with each other. The tools for clamping are small support frames one by one. With the cutting, new support frames are constantly supported, and there are previous The support frame is removed.

The moon track is more convenient, it is a continuously rotating cutter, working around the workpiece, no matter what kind of workpiece it is, it can be cut quickly, and the tool change system of thousands of tools can make the cutting change It was very easy.

This is the CNC machining center he imagined.

Instead of the current stupid, black and thick machine tool, the machine tool is still clamped in the past. After processing half of it, it moves over, and then clamps and cuts the other half.

Both affect a certain accuracy and make it impossible to work with many shapes.

The design in his goal must be the best.

Even Si Fan admired him, his idea is really good, as for the knife changing system.

There are ready-to-use parts that can be built at any time, and the other parts are easy to say. To cooperate with this cutting method, the complexity of the system used and the sturdiness of the metal are all very terrifying, especially for this cutting tool, how can such a small cutter be used!

fastest update

The fastest update, no pop-up window, please bookmark ().